This weekend was a bust...

I wanted to get some painting done but due to the weather, I didn't get much done. I picked up the Herculiner and more paint to mod the old computer chassis. I did get all the metal parts sanded down and paint removed. I also got almost all of the parts primed but there are still about 2 more coats that need to be put on before I can paint.

I thought I'd be able to get it done over the weekend but being a full tower, there's a lot that needs to be prepped before I can paint.

I did order and purchase a powder coating kit, I should have that in by next week... Looking forward to trying it out, on what, I'll figure that out when the time arrives.

つづく ( To be continued... )

Love the Grinder!!!

Power tools, gotta love um! I used my grinder for the first time today to get the paint off the truck so that I could paint. First thing I did was get rid of the tail gate cap that was riveted into the tail gate door. I first tried to drill out the rivets, but that didn't quite work. So I got the grinder out and took out the rivets that way, man was that fast and easy!

After removing that, I swapped out the grinding wheel for a sanding wheel and got to work on removing the paint from the top of the bed rails. Once that was done, I got the primer on and then the paint. Total time spent, 8 hours... I didn't get all of it done and now I need to wash the truck with all that dust from the sanding.

Next weekend, hopefully I'll be able to put on the Herculiner and do the rims.

つづく ( To be continued... )

Funniest thing I've seen so far...

After getting home tonight and walking in to Samantha complaining, I noticed that her entire tail was twitching. Now, for cats, when they are happy, the tails are pointing straight up in the air. The only difference was that not only was it straight up in the air, her tail was twitching very rapidly... it was the funniest thing I've seen yet.

Other than that, for the last month so far, she always has the need to crawl under the covers when I go to bed. She'll try and pull the sheet back so that she can crawl under, then she'll just sit there as happy as can be. I've also noticed that in the middle of the night, she'll end up lying next to me and will try to play with me. The other night, she was grabbing my hand, doing those rabbit kicks and end up trying to take a chunk out of my hand.

Other than that, I'm looking forward this weekend, I'm planning on doing some light body work and painting on the truck. I have a list of the supplies I'll need and on top of that, I'll be touching up the bed liner that I put on this past weekend.

つづく ( To be continued... )

More work on the Truck...

Started on Saturday by scrubbing down the bed of the truck. It pretty much took up the whole day and by the time I was pretty much forced to quit on account of Rain, I had pretty much worn myself out...

This morning, my arms and lower back were aching from scrubbing the bed to get the top coat off so that the Herculiner would adhere to the bed. By the time I got out there to finish the job, it was about 10 in the morning. After working on the front rims a bit and debating on putting on the front mud guards, I finally started wiping down the bed with the cleaner for the final prep for applying the bed liner.

The first coat took about 1 - 2 hours to apply. The 2nd coat took about half the time. At this time, there are still a few spots I need to touch up however I was pretty wiped out from all that work. Even with the gloves and trying to be careful not to get the liner on me, I ended up with a couple splatter marks on my face and several spots on my hands.

I think part of it was from the chemicals that is in the bedliner which is the same stuff I had to use to clean and prep the surface called Xylene. Pretty nasty stuff to be breathing in, I didn't have a really good resprirator which would've made a big difference, but at least the cheaper one help prevent me from breathing in the dust.

Tomorrow, I'll have to try and get up early so that I can put the tonneau cover back on, only to have to take it off again later when I re-paint the top of the bed walls. I'll also be getting bed rail covers so I'll have to take them off again to put those on. You must be asking yourself, why paint if I'm just going to cover it up, well... if I repaint it, I'll be able to get the rust off and keep it off by re-painting, also I'll be filling the holes that were left from the previous owner when they drilled into the bed rails to hold the topper that was on there. Oh, and I got rid of the topper cause it was warped and missing the keys to lock it and also because the shocks to hold up the topper door were shot.

つづく ( To be continued... )

The last week in review...

I finally got the Tonneau cover that I was hoping to get from Fleet Farm.  I also picked up a Makita 4" Angle Grinder so I can do some body work on the truck.  There are about 3 areas I want to get before winter.  I've already painted the 2 rear rims of my truck and hopefully will get to the front 2.  I've also put on the rear mud guards and will put on the front 2 this weekend.

I'm also planning on preparing the bed of the truck so that I can put on a bed liner by Herculiner instead of putting in a drop in liner which will be better in the long run.    I've already replaced both calipers and after this, I'll be taking a break of sorts from upgrading the truck.

つづく ( To be continued... )